Differences

This shows you the differences between two versions of the page.

appnote:ibft [2016/01/17 01:01]
nomizfs
appnote:ibft [2016/01/17 01:12] (current)
nomizfs
Line 37: Line 37:
**2.** After installation reboot into system and do as root: **2.** After installation reboot into system and do as root:
-  ''apt-get install open-iscsi -y'' +  apt-get install open-iscsi -y 
- +  echo "ISCSI_AUTO=true" > /etc/iscsi/iscsi.initramfs 
-  ''echo "ISCSI_AUTO=true" > /etc/iscsi/iscsi.initramfs'' +  nano /etc/initramfs-tools/initramfs.conf
- +
-  ''nano /etc/initramfs-tools/initramfs.conf''+
scroll down and set DEVICE=eth0 scroll down and set DEVICE=eth0
Line 52: Line 50:
-**3.** ''update-initramfs -u'' +**3.**  
 +   
 +''update-initramfs -u'' 
 +   
 +  
Done, your system will now boot from iscsi with static or dhcp based ip settings, which are defined only once server-side in ipxe boot scripts. (edit: might not be entirely true using static ip, but static ip setup kinda defies the whole idea of this guide) Done, your system will now boot from iscsi with static or dhcp based ip settings, which are defined only once server-side in ipxe boot scripts. (edit: might not be entirely true using static ip, but static ip setup kinda defies the whole idea of this guide)
Line 69: Line 70:
**2.** after installation do: **2.** after installation do:
-  ''yum update && yum install -y iscsi-initiator-utils'' +  yum update && yum install -y iscsi-initiator-utils 
- +  echo "add_dracutmodules+="iscsi"" > /etc/dracut.conf.d/ibft.conf 
-  ''echo "add_dracutmodules+="iscsi"" > /etc/dracut.conf.d/ibft.conf'' +  nano /etc/default/grub
- +
-  ''nano /etc/default/grub''+
add the following 3 entries to GRUB_CMDLINE_LINUX="rd.iscsi.firmware=1 rd.iscsi.ibft=1 netroot=iscsi:ibft" add the following 3 entries to GRUB_CMDLINE_LINUX="rd.iscsi.firmware=1 rd.iscsi.ibft=1 netroot=iscsi:ibft"
-  ''update-grub (or grub-update or grub2-update or update-grub2, who cares anymore..)'' +  update-grub 
- +  dracut -v
-  ''dracut -v''+
Done. Done.
 
appnote/ibft.txt · Last modified: 2016/01/17 01:12 by nomizfs
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki
All uses of this content must include an attribution to the iPXE project and the URL http://ipxe.org
References to "iPXE" may not be altered or removed.