Differences

This shows you the differences between two versions of the page.

appnote:xp_2003_direct_install [2015/11/04 18:01]
tal.aloni Updated image url
appnote:xp_2003_direct_install [2017/08/26 18:17] (current)
tal.aloni Updated URLs
Line 6: Line 6:
=== Prerequisites === === Prerequisites ===
-  * [[http://iknowu.duckdns.org/files/public/integratedrv/IntegrateDrv.htm|IntegrateDrv]] (1.0.1 or newer)+  * [[http://vm1.duckdns.org/Public/IntegrateDrv/IntegrateDrv.htm|IntegrateDrv]] (1.0.1 or newer)
  * [[http://git.ipxe.org/release/sanbootconf|sanbootconf]] (1.1.1 or newer, 1.1.2 is required for Windows 2000)   * [[http://git.ipxe.org/release/sanbootconf|sanbootconf]] (1.1.1 or newer, 1.1.2 is required for Windows 2000)
  * Text-mode setup does not support the virtual bus device architecture, if you have an nVidia network adapter, Broadcom NetXtreme II, or other adapter that its official driver implements a virtual bus, you have to obtain a text-mode compatible driver (a.k.a RIS-compatible driver) to be used during the installation. (a text-mode compatible driver for nVidia NICs is bundled with IntegrateDrv)   * Text-mode setup does not support the virtual bus device architecture, if you have an nVidia network adapter, Broadcom NetXtreme II, or other adapter that its official driver implements a virtual bus, you have to obtain a text-mode compatible driver (a.k.a RIS-compatible driver) to be used during the installation. (a text-mode compatible driver for nVidia NICs is bundled with IntegrateDrv)
Line 52: Line 52:
8. You will be asked to specify a default static TCP/IP address. if all goes well, this address will not be used, and instead sanbootconf / iScsiBP will set the address that was provided by your DHCP server. 8. You will be asked to specify a default static TCP/IP address. if all goes well, this address will not be used, and instead sanbootconf / iScsiBP will set the address that was provided by your DHCP server.
-{{http://iknowu.duckdns.org/files/public/integratedrv/Screenshots/IntegrateDrv_TCPIP_settings.png}}+{{http://vm1.duckdns.org/Public/IntegrateDrv/Screenshots/IntegrateDrv_TCPIP_settings.png}}
9. Congratulations, you now have an iSCSI capable Windows XP \ 2003 installation, you can reboot your machine, and use the sanboot command to boot into the installation: 9. Congratulations, you now have an iSCSI capable Windows XP \ 2003 installation, you can reboot your machine, and use the sanboot command to boot into the installation:
Line 60: Line 60:
10. The installation should detect your iSCSI disk: 10. The installation should detect your iSCSI disk:
-{{http://iknowu.duckdns.org/files/public/integratedrv/Screenshots/Text_Mode_Disk_Detected.png}}+{{http://vm1.duckdns.org/Public/IntegrateDrv/Screenshots/Text_Mode_Disk_Detected.png}}
11. During GUI-mode installation phase, you'll be warned about installing unsigned drivers: 11. During GUI-mode installation phase, you'll be warned about installing unsigned drivers:
Some of the drivers had to be modified to start during boot, and as a result their signature is no longer valid, you can safely ignore these warnings, and approve the installation: Some of the drivers had to be modified to start during boot, and as a result their signature is no longer valid, you can safely ignore these warnings, and approve the installation:
-{{http://iknowu.duckdns.org/files/public/integratedrv/Screenshots/GUI_Mode_Unsigned_Driver.png}}+{{http://vm1.duckdns.org/Public/IntegrateDrv/Screenshots/GUI_Mode_Unsigned_Driver.png}}
===== Method #2: Creating an iSCSI capable installation CD ===== ===== Method #2: Creating an iSCSI capable installation CD =====
 
appnote/xp_2003_direct_install.txt · Last modified: 2017/08/26 18:17 by tal.aloni
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki
All uses of this content must include an attribution to the iPXE project and the URL http://ipxe.org
References to "iPXE" may not be altered or removed.