Differences

This shows you the differences between two versions of the page.

err:1c0d62 [2011/03/22 20:11] (current)
Line 1: Line 1:
 +This error indicates that you are attempting to use an invalid combination of initiator and target credentials for iSCSI authentication.
 +
 +You can view the set of credentials that iPXE is using with the ''show'' command:
 +
 +    iPXE> show username
 +    username:string = mcb30
 +    iPXE> show password:hex
 +    password:hex = 64:72:65:61:6d:20:6f:6e
 +    
 +    iPXE> show reverse-username
 +    Could not find "reverse-username"
 +    iPXE> show reverse-password:hex
 +    Could not find "reverse-password"
 +
 +Things to try:
 +
 +  * If you are using initiator (forward) authentication, check that you have specified both ''username'' and ''password''.
 +
 +  * If you are using target (mutual) authentication, check that you have specified all four of ''username'', ''password'', ''reverse-username'', and ''reverse-password''.
 +
 +Note that you cannot use target authentication without also providing credentials for initiator authentication, since this is not permitted by the iSCSI protocol.
 
err/1c0d62.txt · Last modified: 2011/03/22 20:11 (external edit)
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki
All uses of this content must include an attribution to the iPXE project and the URL http://ipxe.org
References to "iPXE" may not be altered or removed.