Differences

This shows you the differences between two versions of the page.

Link to this comparison view

cmd:nslookup [2012/09/10 21:55] (current)
mcb30 created
Line 1: Line 1:
 +====== Resolve host name to network address ======
 +
 +===== Synopsis =====
 +
 +    nslookup <​setting>​ <​hostname>​
 +
 +===== Examples =====
 +
 +=== Look up the IP address for ipxe.org ===
 +
 +    nslookup address ipxe.org
 +    echo ${address}
 +
 +=== Set TFTP next-server address to boot.ipxe.org ===
 +
 +    nslookup net0/​next-server boot.ipxe.org
 +
 +===== Description =====
 +
 +Set value of the specified configuration [[:​settings|setting]] to the network address corresponding to the specified host name.
 +
 +===== Command status =====
 +
 +^ Success ​  | The name was resolved successfully,​ and the setting was applied ​              |
 +^ Failure ​  | The name was not resolved successfully,​ or the setting could not be applied ​  |
 +
 +===== See also =====
 +
 +  * ''​[[:​cmd:​set]]''​
 +  * ''​[[:​cmd:​show]]''​
 +  * [[:cfg|List of all iPXE settings]]
 +  * [[:cmd|List of all iPXE commands]]
 +
 +===== Build options =====
 +
 +This command is available only when the build option ''​[[:​buildcfg:​NSLOOKUP_CMD]]''​ is enabled.
 +
 +===== Notes =====
 +
 +You should not generally need to use the ''​nslookup''​ command, since you can simply include a host name as part of a URI.  For example:
 +
 +    chain http://​boot.ipxe.org/​demo/​boot.php
  
cmd/nslookup.txt ยท Last modified: 2012/09/10 21:55 by mcb30
Recent changes RSS feed CC Attribution-Share Alike 4.0 International Driven by DokuWiki
All uses of this content must include an attribution to the iPXE project and the URL http://ipxe.org
References to "iPXE" may not be altered or removed.