(Error code 040ee1)
This error originated from one of the following locations within the iPXE source code:
DEBUG=ifmgmt
(Please edit this page to include any of your own useful hints and tips for fixing this error.)
This is an old revision of the document!
This error indicates that iPXE timed out while attempting to autoconfigure a network adapter.
In almost all cases the method used for autoconfiguration will be DHCP, and you should read the information relating to DHCP timeout.
Things to try:
ifstat
command to see if iPXE is receiving any packets (the “RX” counter) or experiencing receive errors (the “RXE” counter).ifconf
command. For example:ifconf -c dhcp net0 ifconf -c ipv6 net0
This may give you more specific information about the underlying problem.
* If connected to a Cisco switch make sure 'spanning-tree portfast' is enabled on the switch. Otherwise iPXE will fail establishing network connection.