Error: No configuration methods succeeded
Possible sources
This error originated from one of the following locations within the iPXE source code:
General advice
Try using the
latest version of iPXE. Your problem may have already been fixed.
Try building iPXE with the
debug option
DEBUG=ifmgmt
You can
contact the iPXE developers and other iPXE users.
Refresh this page after 24 hours. This page is actively monitored, and further information may be added soon.
Additional notes
(Please edit this page to include any of your own useful hints and tips for fixing this error.)
This is an old revision of the document!
This error indicates that iPXE timed out while attempting to autoconfigure a network adapter.
In almost all cases the method used for autoconfiguration will be DHCP, and you should read the information relating to DHCP timeout.
Things to try:
After the failed autoconfiguration attempt, check the output from the
ifstat
command to see if iPXE is receiving any packets (the “RX” counter) or experiencing receive errors (the “RXE” counter).
Test specific autoconfiguration methods in isolation using the
ifconf
command. For example:
ifconf -c dhcp net0
ifconf -c ipv6 net0
This may give you more specific information about the underlying problem.
If this only shows up after a reset when chainloading undionly.kpxe, it may be a bug in your PXE boot ROM. A hard reboot will work as a quick fix. A long term solution would be to replace the buggy boot ROM (either with a newer version or with iPXE). Alternately you may chainload a iPXE image with a real driver for the specific card. This is known issue with some virtual machine's stock PXE ROMs.