Differences

This shows you the differences between two versions of the page.

--- howto:wds_iscsi [2016/07/06 07:29]
mcb30
+++ howto:wds_iscsi [2016/07/06 08:06]
mcb30
@@ Line 23: / Line 23: @@
 {{ :screenshots:msdhcp_reservation_options.png?455x396 |Configuring new options}}
-Scroll down to option **017 Root Path** and enter the iSCSI root path for the installation.  For example, to boot from the iSCSI target at ''10.253.253.1'' using LUN 0 of ''iqn.2010-04.org.ipxe:rabbit'', you would set option **017 Root Path** to
+Scroll down to option **017 Root Path** and enter the iSCSI root path for the installation.  For example, to boot from the iSCSI target at ''10.253.253.1'' using the IQN ''iqn.2010-04.org.ipxe:rabbit'', you would set option **017 Root Path** to
-    iscsi:10.253.253.1:::0:iqn.2010-04.org.ipxe:rabbit
+    iscsi:10.253.253.1::::iqn.2010-04.org.ipxe:rabbit
-{{ :screenshots:msdhcp_set_root_path.png?404x448 |Configuring the iSCSI root path}}
+{{ :screenshots:msdhcp_set_root_path.png?414x462 |Configuring the iSCSI root path}}
 Boot the diskless computer using iPXE.  (If the diskless computer does not have an iPXE boot ROM, then you will need to set up [[:howto:msdhcp#pxe_chainloading|PXE chainloading]].)
@@ Line 56: / Line 56: @@
   * Examine the Setup log using \\ <code>    notepad x:\windows\panther\setupact.log</code>Check for the ''DiskInfo'' lines, which should contain information such as \\ <code>    DiskInfo:===== Disk number [0] =====
-    DiskInfo:  Friendly name: [SCST_FIO duckling SCSI Disk Device]
+    DiskInfo:  Friendly name: [LIO-ORG rabbit SCSI Disk Device]
     DiskInfo:  Arc path: [multi(0)disk(0)rdisk(0)]
     DiskInfo:  Disk signature [0x9A7083D5]