This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
sanuri [2011/12/05 21:37] mcb30 |
sanuri [2016/07/06 07:39] mcb30 |
||
---|---|---|---|
Line 4: | Line 4: | ||
#!ipxe | #!ipxe | ||
- | sanboot iscsi:10.0.4.1:::1:iqn.2010-04.org.ipxe.dolphin:storage | + | sanboot iscsi:10.253.235.1::::iqn.2010-04.org.ipxe:rabbit |
or as the ''[[:cfg:root-path]]'' DHCP option (using [[:howto:dhcpd|ISC dhcpd]]): | or as the ''[[:cfg:root-path]]'' DHCP option (using [[:howto:dhcpd|ISC dhcpd]]): | ||
- | option root-path "iscsi:10.0.4.1:::1:iqn.2010-04.org.ipxe.dolphin:storage"; | + | option root-path "iscsi:10.253.253.1::::iqn.2010-04.org.ipxe:rabbit"; |
or as the ''[[:cfg:root-path]]'' DHCP option (using the [[:howto:msdhcp|Microsoft DHCP server]]): | or as the ''[[:cfg:root-path]]'' DHCP option (using the [[:howto:msdhcp|Microsoft DHCP server]]): | ||
- | {{ :screenshots:msdhcp_set_root_path.png?202x224 |Root path in the Microsoft DHCP server}} | + | {{ :screenshots:msdhcp_set_root_path.png?207x231 |Root path in the Microsoft DHCP server}} |
The format of the SAN URI depends upon the SAN protocol that you are using. | The format of the SAN URI depends upon the SAN protocol that you are using. | ||
Line 32: | Line 32: | ||
* ''<protocol>'' is ignored and can be left empty.((The only valid value for ''<protocol>'' is ''6'', indicating that the protocol is TCP.)) | * ''<protocol>'' is ignored and can be left empty.((The only valid value for ''<protocol>'' is ''6'', indicating that the protocol is TCP.)) | ||
* ''<port>'' is the TCP port of the iSCSI target. It can be left empty, in which case the default port (3260) will be used. | * ''<port>'' is the TCP port of the iSCSI target. It can be left empty, in which case the default port (3260) will be used. | ||
- | * ''<LUN>'' is the SCSI LUN of the boot disk. It can be left empty, in which case the default LUN (0) will be used. | + | * ''<LUN>'' is the SCSI LUN of the boot disk, in hexadecimal. It can be left empty, in which case the default LUN (0) will be used. |
* ''<targetname>'' is the iSCSI target IQN. | * ''<targetname>'' is the iSCSI target IQN. | ||