This is an old revision of the document!
The following settings are used by iPXE. Settings may be displayed and modified using the interactive configuration tool, or using the show
and set
commands.
Network device settings | ||
---|---|---|
mac | (hex) | MAC address |
bustype | (string) | Bus type |
busloc | (uint32) | Bus location |
busid | (hex) | Bus ID |
chip | (string) | Chip name |
ssid | (string) | Wireless SSID |
active-scan | (int8) | Actively scan for wireless networks |
key | (string) | Wireless encryption key |
IPv4 settings | ||
ip | (ipv4) | IP address |
netmask | (ipv4) | Subnet mask |
gateway | (ipv4) | Default gateway |
dns | (ipv4) | DNS server |
domain | (string) | DNS domain |
Boot settings | ||
filename | (string) | Boot filename |
next-server | (ipv4) | TFTP server |
root-path | (string) | SAN root path |
initiator-iqn | (string) | iSCSI initiator name |
keep-san | (int8) | Preserve SAN connection |
skip-san-boot | (int8) | Do not boot from SAN device |
Host settings | ||
hostname | (string) | Host name |
uuid | (uuid) | UUID |
user-class | (string) | DHCP user class |
manufacturer | (string) | Manufacturer |
product | (string) | Product name |
serial | (string) | Serial number |
asset | (string) | Asset tag |
Authentication settings | ||
username | (string) | User name |
password | (string) | Password |
reverse-username | (string) | Reverse user name |
reverse-password | (string) | Reverse password |
Cryptography settings | ||
crosscert | (string) | Cross-signed certificate source |
trust | (hex) | Trusted root certificate fingerprints |
cert | (hex) | Client certificate |
privkey | (hex) | Client private key |
Miscellaneous settings | ||
scriptlet | (string) | Boot scriptlet |
priority | (int8) | Settings priority |
dhcp-server | (ipv4) | DHCP server |
use-cached | (uint8) | Use cached settings |
syslog | (ipv4) | Syslog server |
syslogs | (string) | Encrypted syslog server |
buildarch | (string) | Build architecture |
platform | (string) | Firmware platform |